General
It allows you to use the Mordomus iThink interface in multiple languages ​​and change the visual appearance of Mordomus with selectable skins.

1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: System
4.1. In graphic interface:
4.1.1. In Language, press button: and select the language you want;
4.1.2. In Aspect graph, press button: and select the pattern you want.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: System
4.1. In Date/Time:
4.1.1. In Date, press button: and select the Year, Month, Day and press button: OK
4.1.2. In Time, press button: and enter the time you want. On the numeric keypad, press button:
It allows you to reset the CPU Mordomus iThink automatically periodically; way to protect your CPU from any failure that might occur due to the continued operation of the CPU. The restart of the CPU Mordomus iThink, can be configured in two ways:
- Normal, the CPU restarts, preventing Mordomus iThink reset the settings on the modules, preventing the active systems restart. Example: lamps that were lit, to turn off and back on again.
- Overall, the CPU resets the system and apply the configuration settings to the respective modules, keeping unchanged active systems.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: System
4.1. In Automatic Restart:
4.1.1. In Restart Type, press button: and select the method of restarting the CPU;
4.1.2. In Day of the Week, press button: and select the day of the week or every day, depending on your interests;
4.1.3. In Time, press button: and enter the time you want the CPU restart;
4.1.3.1. On the numeric keypad, press button:
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: System
4.1. In Startup:
4.1.1. In Mode, press button: and select the CPU startup mode;
Fast: Starts Mordomus software iThink iThink Mordomus without saving settings on the hardware;
Normal: It is a longer startup, as there are made in the settings Mordomus iThink module.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: System
4.1. In Screen-Saver:
4.1.1. In Execute, press button: and select the screen saver you want;
Notice:
- To enable the option, select the Enable activation box;
- There is only screensaver if any added folders with photos;
- The screen saver is started when the Mordomus is inactive during specified in minutes after (minutes). You can change this time by pressing button:
- To protect your Mordomus using a screen saver login, you must select the Login Protection activation box. This protection blocks access to your Mordomus when the screen saver is activated. When you want to resume the Mordomus iThink, validation login is requested;
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: System
4.1. In Update Available:
4.1.1. Check for available updates, otherwise it is visible the following message: "None";
4.1.2. When an update is available, you must press button: Download
4.1.3. After the download completes, press button: Install
4.1.4. When the button: Update web radios list, is available, it means that you must press it to update the list.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: Home Screen
4. In Meteorology Status:
4.1. Press the activation box Show;
4.2. Select the type of weather information you want (local weather station or online weather forecast);
4.3. If you select local weather station:
4.3.1. Press button: to select the weather station Mordomus iThink;
4.3.1.1. In the Type Selection window, select it and press button: Ok
4.4. If you select Local weather Online:
4.4.1. Press button: to make the configuration of local data;
4.4.1.1. In weather forecast configuration, set the Town and Country and press button: Apply
Note: The Online Meteorology requires that your CPU Mordomus iThink has Internet connection.
5. Alarms Status and Inputs:
5.1. Select the activation box on the widget you want in the Mordomus Home, Intrusion Alarms, Technical Alarms, Inputs status;
5.1.1. Selected activation box Intrusion Alarms and/or Technical alarms, view on the Mordomus Home the state of all configured alarms;
5.1.2 Selected activation box Inputs Status you may view on the Mordomus Home the digital sensor state (door, window or gate open/close, machine on/off) and analog (temperature, pressure, voltage, humidity);
5.1.2.1. In Inputs, press button: and in Input Selection window, select the equipment you want and press button: Ok
It allows you to set up video/sound capture device existing in Mordomus iThink system.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: Video-Doorphone
4. In the Zones and Video-Doorphone Functions window -> Video Device:
4.1. In Device, press button:
4.1.1. In the selection window, select the appropriate device and press button: Ok
4.2. Then proceed to fill the remaining data that will be available depending on the selected video device.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: Video-Doorphone
4. In the Zones and Video-Doorphone Functions window -> Video-Doorphone:
4.1. In Zone, press button: and select the video zone you want to configure;
4.1.1. Press button: and enter a new description for the zone you have selected;
4.1.1.1. On the alphanumeric keypad, press button: Ok
4.2. In Ringer Switch, press button: and select the input (doorbell switch) that will trigger the Mordomus iThink video intercom when someone rings the bell;
4.2.1. In the Input Selection window, press button: Ok
4.3. In electric latch (Mordomus), press button: and select the output (electric lock) to associate with the video entry zone for door opening;
4.3.1. In the Output Selection window, press button: Ok
4.4. In Bell Ringtone/Audio file, press button: and select the audio file you want to hear when someone rings the bell;
4.4.1. In the selection window, press button: Ok
4.5. In Outputs to Trigger with the bell, press button: and select the output(s) that you want to activate when someone rings the bell;
4.5.1. In the Output Selection window, press button: Ok
Tip: In the device(s) selection (Selection Input / Output), use the filter zone, to easily locate the device (input or output) you want, filtering them by type, floor and division.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Configurations, press button: General
3. In General Configurations, press: Video-Doorphone
4. In the Zones and Video-Doorphone Functions -> Custom Functions:
4.1. In function, press button:
4.1.1. On the alphanumeric keypad, enter a description for the role and press button: Ok
4.2. In Outputs, press button: and select the equipment you want to associate with the function;
4.2.1. In the Output Selection window, press button: Ok
TIP: In the device(s) selection (Output Select), use the filter zone, to easily locate the device (output) you want, filtering them by type, floor and division.
Note: Custom functions are common to all video intercom zones and controlled in the video intercom window.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: Video-Doorhpone
4. In the Zones and Video-Doorphone Functions -> Video-Doorphone:
4.1. In Email Addresses to be notified, press button:
4.1.1. On the alphanumeric keypad, enter the email address and press button: Ok
Note:
- The number of email addresses is unlimited.
- For notifications be sent you need to set up an email account: Configurations -> General -> Email Notifications
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: Video Surveillance
4. In the Video Surveillance Window -> Video System:
4.1. In Interface, press button: selecine and the type of video system interface;
4.1.1. In Device, press button: and select the video equipment;
4.1.2. In Channels, press button: and the number of video channels;
4.1.3. In IP, press button: and on the numeric keypad type the number of IP;
4.1.3.1. On the numeric keypad, press button:
4.1.4. In Port, press button: on the numeric keypad and enter the corresponding number;
4.1.4.1. On the numeric keypad, press button:
4.1.5. In User, press button: in the alphanumeric keypad and enter the user;
4.1.5.1. On the alphanumeric keypad, press button: Ok
4.1.6. In Pass, press button: in the alphanumeric keypad and enter the password;
4.1.6.1. On the alphanumeric keypad, press button: Ok
4.2. To save, press button: Apply
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: Multimedia
3.1. In Multimedia Interface -> Sleep function (minutes), press button:
3.1.1. On the numeric keypad, enter the time in minutes and press button: Ok
4. When the Sleep function is activated, all audio outputs will be silenced in time (minutes) you set.
Note: Sleep function is active in home Mordomus -> button: Multimedia Sleep
It allows you to select any existing physical disk.
1. In Mordomus iThink Home Menu, press the button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: Multimedia
3.1. Multimedia Content Directory -> Location, press button: and select an existing physical disk.
The GSM modem is used to send alarm notifications via SMS, notifying alarm events, ie, if your alarm goes off you will be sent an SMS to your mobile phone.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: GSM Modem
4. In GSM module:
4.1. In Port press button: and select the port where the modem is connected. Note that COM1 is reserved for Mordomus communications with PCCWd.
4.2. In Equipment press button: and select the type of modem equipment;
4.3. In Baudrate press button: and select the value 115200, and the value 9600 is only used on older modems;
4.4. In PIN code press button: and enter your SIM card PIN inserted into the modem;
4.4.1. On the numeric keypad press button:
4.5. In Operator press button: and select the operator you want. If the operator is not listed, you must select Other.
4.6. In Message Center, if you selected the option Another operator, press button: and enter the number of the message center.
4.6.1. On the numeric keypad press button:
Note: For operators (MEO, WE and VODAFONE) the number of Message Center automatically appears when selected Operator.
4.7. In Credit Code if you selected the option Another operator, press button: and enter the code request for the credit.
4.7.1. On the numeric keypad press button:
Note: For operators (MEO, WE and VODAFONE) the credit code automatically appears when selected Operator.
4.8. Press button: Apply
Note: To enable the GSM device, select the activation box: Enable
4.9. In Test, press button: Check Connection and GSM State to check the GSM module connection, the network status and state of the SIM card.
4.9.1. Press button: Send Test SMS to test all the configuration.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: General
3. In General Configurations, press: Email Notifications
4. In Email Accounts for sending notifications:
4.1. In E-mail Address, press button: and enter the address you want;
4.1.1. On the alphanumeric keypad, press button: Ok
4.2. In SMTP Server, press button: and enter the mail server address;
4.2.1. On the alphanumeric keypad, press button: Ok
4.3. In Port, press button: and enter the mail server port number;
4.3.1. On the numeric keypad, press button:
Note: According to the required configuration of e-mail account, you must select the activation box: SSL (security communication protocol);
4.4. In Username, press button: and enter the username that you want;
4.4.1. On the alphanumeric keypad, press button: Ok
4.5. In Password, press button: and enter the password you want;
4.5.1. On the alphanumeric keypad, press button: Ok
4.6. Press button: Apply
Note: For the e-mail account is active, select the activation box: Enable
4.7. In Test - Send test for email, press button: and enter an email address to receive a test notification;
4.7.1. On the alphanumeric keypad, press button: Ok
E-Map
Set the position of the devices by the home layout (blueprint) floor by floor and filter devices by type.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: E-MAP
3. In the E-MAP window:
3.1. In Floor, press button: and select the floor where you want to configure devices;
3.2. In Division, press button: and select the room in which you want to configure devices. You can select All and visualize the entire floor.
3.3. In device type, press button: and select the type of device you want to configure;
3.3.1. In devices, has available the list of devices according to the selected type;
3.4. In Devices, press the device you want to put in the layout (blueprint), and without the drop, drag it with your finger to the location in the layout (blueprint) you want;
3.4.1. You can adjust or change the position of a device in the layout (blueprint) by dragging it with your finger to the new location you want.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: E-MAP
3. In the E-MAP window:
3.1. In Floor, press button: and select the floor where you want to remove devices;
3.2. In Division, press button: and select the room in which you want to remove devices. You can select All and visualize the entire floor.
3.3. Having visible layout (blueprint) of the floor / division selected, press the device icon you want to delete and without the drop drag with his finger to the area devices.
Connectivity
Configuration area of ​​equipment that connect to Mordomus iThink via network (TCP / IP).

Examples:


- Tablet;

- Mini Touchscreen Mordomus;

- Mobile;

- Others.

1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: Connectivity
3. In the Connectivity window:
3.1. In MyMordomus -> name for remote access, press button:
3.1.1. On the alphanumeric keypad, enter the family name you want to register and press button: Ok
Your Mordomus will give you the information of the availability of this family name registration; if available, then it becomes the name you want to put in www.mordomus.com to access your home.
3.2. In Port, press button:
3.2.1. On the numeric keypad, enter the communication port number of this service and press button:
3.3. To save, press button: Apply
4. In www.mordomus.com in MyMordomus when you put your family login (Family Name) will be redirected to the remote access of your home, where you should use the access data set in Configurations -> Logs -> Users - > Remote Access.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: Connectivity
3. In the Connectivity window:
3.1. In Access Permissions, press button: User Management
3.1.1. In the Users window -> Remote Access, set for user access via web, selecting/deselecting the active activation box;
3.2. In Pin for equipment, press button:
3.2.1. On the numeric keypad, set the access code of mini murals touch screens (iLP283) connected to Mordomus iThink by TCP / IP and press button:
The Remote Access Field, configure connectivity equipment remotely access the Mordomus iThink.
Example: Tablet PC, Mobile Phone or any other device that accesses the Web by IP of your Mordomus iThink server.
Note: This feature requires that the interface field TCP / IP is active.
The TCP / IP Interface field, configure connectivity systems that communicate with your Mordomus iThink via TCP / IP.
Example: Mini touch screens Mordomus iThink
The HTTP Interface field, configure connectivity systems that communicate with your iThink Mordomus via HTTP.
Example: Mobotix video intercom.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: Connectivity
3. In the Connectivity window -> Connection Port:
3.1. In Remote Access, press button:
3.1.1. On the numeric keypad, set the communication port for this service and press button:
3.1.2. Select the activation box: active, to enable remote access;
3.2. In Interface TCP / IP, press button:
3.2.1. On the numeric keypad, set the communication port for this service and press button:
3.2.2. Select the activation box: active, to enable communication interfaces;
3.3. In HTTP interface, press button:
3.3.1. On the numeric keypad, set the communication port for this service and press button:
3.3.2. Select the activation box: active, to enable communication interfaces;
4. In Connections, you can view the list of devices and their IDs, which are active in their Mordomus iThink.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: Connectivity
3. In the Connectivity window:
Logger
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: Logger
3. In the Logger window - Configurations, press: Scheduled Reports
3.1. In Reports, press button: and in the alphanumeric keypad enter the name with which to identify the report. On the alphanumeric keypad, press button: Ok
3.2. In Report:
3.2.1. For the scheduled report materialize, due in state, activate the active activation box;
3.2.2. Choose Frequency, activating the respective activation box;
3.2.2.1. Depending on the choice of frequency, choose the time, the Weekday or report the start of Day of the month, through the button:
Note: For the type of periodicity Weekly or Monthly, the report shipping time will take place at 00:00h
3.2.3. Choose the Resolution, activating the respective activation box;
3.2.4. Choose the file format, activating the respective activation box;
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: Logger
3. In the Logger window - Configurations, press: Status Configurations
3.1. Configure Graphic Home Menu:
3.2. Press the type of data you want to display in the Home Menu, if consumption meter or Sum counters cost;
3.3. If you enable the chart type Consumption Meter:
3.3.1. In Counter, press button: and select the counter to show the gauge of home Mordomus iThink;
3.3.2. Select the type of scale you want, via the fixed maximum scale activation box (maximum counter value) or Auto scale;
3.3.3. In state, press the Active activation box, just so the energy widget will be visible on the Mordomus iThink Home;
3.3.4. If on the Energy widget, you want to see the total cost of consumption related to the chosen counter, you must activate the enable box consumer costs;
3.3.5. To save, press button: Apply
3.4. If you enable the chart type Sum counters cost:
3.4.1. In counters, press button: and in Device Selection window, select the counter you want and press button: Ok
3.4.2. Select the type of scale you want, through the maximum scale fixed activation box (maximum counter value) or Auto scale;
3.3.3. In state, press Active activation box, just so the energy widget will be visible on the Mordomus iThink Home. You will see the total cost of added counters.
3.3.4 To save press button: Apply
Note:
- You must make the coin configuration, so that the symbol Currency/Country (€) is visible in the energy widget (active when the cost of consumption).
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press: Logger
3. In the Logger window - Configurations, press: Status Configurations
4. In Currency:
4.1. In symbol, press button: and the alphanumeric keypad enter the currency symbol, for example €. On the alphanumeric keypad, press button: Ok
4.2. In Code, press button: and the alphanumeric keypad enter the currency corresponding to the currency symbol, eg EUR. On the alphanumeric keypad, press button: Ok
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press: Logger
3. In the Logger window - Configurations, press: Electricity Tariff
4. In Tariff Type, choose the rate you want;
5. If you chose the Summer/Winter Rates:
5.1. To add the types of schedules cycles, press on cost/KWh button:
5.1.1. In Setting Costs, press button: On the alphanumeric keypad, enter the description of the time cycle and press button: Ok
5.1.2. In Setting Costs, press button: On the numeric keypad, enter the cost corresponding to the time cycle and press the button:
6. In Summer or Winter Rates to enter the corresponding cycles, press button:
6.1. In the Configure rates window:
6.1.1. In Day, select the days according to their interests;
6.1.2. Through buttons: in Start and End Time, set the time interval;
6.1.3. In Cost, press button: and choose the type of cycle time.
6.1.4. To save, press button: Ok
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press: Logger
3. In the Logger window - Configurations, press: Water Tariff
4. To add the levels of consumption, press button:
4.1. Configure echelons, with buttons: enter the range (From and To) volume to consume in m3 and the appropriate cost
4.2. To save, press button: Ok
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurationswindow, press: Logger
3. In the Logger window - Configurations, press: Gas Tariff
4. In Conversion Value -> Convert Factor (kWh/m3), press button: and enter the conversion value to obtain gas consumption in kWh from the m3 that are consumed. On the numeric keypad, press button:
Consumption Control
Set energy consumption goals and optimize control actions to minimize consumption. Control of consumption can be done through one of three ways:


Continuous: Constant Definition consumption limits. Performs a check to the consumption of a particular counter continuously, creating a notification/action when the peak value is exceeded.


By Event: Setting limits upon activation of a particular event. Performs a check to the consumption of a particular counter when the event is according to the selected, creating a notification/action when the peak value is exceeded. This event can be an alarm or any input and the state of this event may be active or inactive.


Time: Setting limits according to set schedules plans. Please note that these plans are not directly related to hourly rates. Performs a check to the consumption of a particular counter when it is within a certain time and day of the week, creating a notification/action when the peak value is exceeded.


The control may be immediate or timed:


Immediate load shedding: Lets you create an equipment list (Outputs Immediate) the shedding (off) immediately, so that the maximum power consumption is reached or exceeded.


Timer Shedding: Allows you to create an equipment list (Outputs Timed) to shedding (off) of paced manner. When the maximum power is exceeded, the first output is switched off after the value in seconds set in: Interval (seconds). In this sequence, the maximum consumption still remains exceeded, the next output is switched off after the value set in seconds, and so on until the end of the deslastrar equipment list (timed output). This control is specific to the use of consumption peaks available for energy suppliers.

1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: Consumption Control
3. In Counter, select the type of counter you want;
4. In Consumer Policy, press button:
4.1. In Consumer Policy window, in control type, press button: and choose the way of control of consumer policy (Continuous, By Event or By Time);

4.2. In Control Type, select Continuous:
4.2.1. In Continuous control -> Peak Consumption (w), press button: On the numeric keypad, enter the maximum power you want and press button:
4.2.1.1. To save the consumption policy, press button: Save

4.3. In Control Type, selected by Event:
4.3.1. In Event, press button: and select the type of event (or Alarm Input) at which to activate the consumption policy;
4.3.2. In Reading object, press button: and select the alarm or input you want;
4.3.3. In state, press button: and select the state you want for the event;
4.3.4. In Consumption W: press button: On the numeric keypad enter the maximum power you want, and press button:
4.3.5. To save the consumption policy, press button: Save
Note:
- If the selected Event: Alarm, the policy only applies when the alarm selected in Object Reading and the state selected in State: Off / On occur.
- If you selected the Event: Input (equipment), the policy applies only when the input you selected in reading object and the state selected in the state, are met.

4.4. If Control Type, select On Time:
4.4.1. In Days of the week, select the days when politics happen;
4.4.2. In From and To through buttons: set the time interval. On the numeric keypad, press button:
4.4.3. In Consumption in W, press button: and enter the maximum consumption that you want. On the numeric keypad, press button:
4.4.4. To save the consumption policy, press button: Save

5. In Notification Control:
5.1. In Surround Sound Notification -> Sound File, press button:
5.1.1. In the selection window, select the audio file you want and press button: Ok
5.1.2. Select in State, the active activation box to the sound system notification to be active.
5.2. In GSM Notification -> SMS text, press button:
5.2.1. On the alphanumeric keypad enter the message you want to view with the notification and press button: Ok
5.2.2. Select in State, the active activation box to the GSM notification is active.
5.2.3. In Tlm1 enter phone number (maximum 4 telephone contacts) where you want to receive the SMS. On the numeric keypad, press button:
6. In Immediate shedding
6.1. In Immediate Outputs (equipment), press button:
6.1.1. In the Output Selection window, select the equipment to deslastrar (which turns off) when the maximum power is reached or exceeded, and press button: Ok
TIP:
- If you want the equipment to connect again, due in shedding Immediate -> Immediate Outputs, select the equipment you want to reconnect and activate the Reactivate activation box. Then press button: Define and on the numeric keypad enter the new peak consumption (new consumption should be < or = to consumptio set on consumption policy).
7. In Timed Shedding:
7.1. In Timed Outputs (devices), press button:
7.1.1. In Output Selection window, select the shedding device (that turn off) when maximum consumption is reached;
7.2. In Timer Outputs -> Interval (seconds), press button: and fill with shedding time (turn off) between outputs. On the numeric keypad fill with the value you want in seconds and press button:
TIP:
- If you want the equipment to connect again, you should, in shedding Timer -> Outputs Timed, select the equipment you want to reconnect and activate the Reactivate activation box. Then press the button: Define and on the numeric keypad enter the new peak consumption (new consumption should be < or = to the consumption peal you defined on the consumption policy).
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: consumption control
3. In Counter, select the type of meter where consumer policy is if you want to change;
4. In Consumer Policies, select the consumption policy to be changed and press button: and make the changes you want;
5. In Control Notification, make the desired changes;
6. In Immediate load shedding and shedding Timer, press button: and make the changes you want.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window, press button: Consumptiom Control.
3. In Counter, choose the type of counter which is linked to consumer policy;
4. In Consumer Policy, choose the consumption policy you want to delete and press button: