Licenses
- This feature should be managed by its Installer Mordomus Agent .
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Licenses
3. In the Licenses window-> Mordomus Software:
3.1. In PCCWd series No. Module press button: and enter the number of PCCWd series;
3.1.1. On the numeric keypad, press button:
3.2. In Software Card press button: and enter the number appearing on the Mordomus software card;
3.2.1. On the alphanumeric keypad, press button: Ok
3.3. In Software Activation Key press button: and enter the key provided to it after its application for registration;
3.4. To save and proceed with the activation of Mordomus software, press button: Apply
3.4.1. After saving the data, note that in Licenses -> Mordomus Software -> State is green and with the word: ON
5. In the Licenses window -> Mordomus Software -> Features:
5.1. Select the feature you want to activate (you must have purchased features cards) and Functionality Card: X, press button: and enter the number corresponding to the card you selected functionality;
5.1.1. On the alphanumeric keypad, press button: Ok
5.2. In Activation key, press button: and enter the key that was provided to you after your order activation;
5.2.1. On the alphanumeric keypad, press button: Ok
5.3. To save and proceed with the activation of the feature, press button: Apply
Notice:
- If the license/functionality is in the evaluation period, the information of the missing days for evaluation will be visible. After the evaluation time will be visible X;
- If the license/functionality is already licensed a Ok will be displayed;
- After the effected activation, as well as during the time of evaluation, the features are fully operational.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Licenses
3. In the Licenses window, press: Customer Data
3.1. In Holder Name press button: and enter the Mordomus customer's name ;
3.1.1. On the alphanumeric keypad, press button: Ok
3.2. In Address press button: and enter the Mordomus client address;
3.2.1. On the alphanumeric keypad, press button: Ok
3.3. In Zip Code and Town press button: and enter their data;
3.3.1. On the alphanumeric keypad, press button: Ok
3.4. In Primary Email enter the Mordomus customer's email (up to a maximum of 2 - Secondary mail);
3.4.1. On the alphanumeric keypad, press button: Ok
- Area reserved for the Mordomus Installer Agent .
Floors and Divisions
Structure your home; set floors, divisions and images to use E-Map.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Floors and Divisions
3. In the Record window of floors and divisions:
3.1. In floors, press button: to add floors;
3.1.1. On the alphanumeric keypad, enter a description for the floor and press button: Ok
3.2. In Divisions, press button: to add divisions to the floor;
3.2.1. On the alphanumeric keypad, enter a description for the division and press button: Ok
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Floors and Divisions
3. In the Record window of floors and divisions:
3.1. In floors, select the one you want to change and press button:
3.1.1. On the alphanumeric keypad, enter a new description for the floor and press button: Ok
3.2. In Divisions select the division that you want to change and press button:
3.2.1. On the alphanumeric keypad, enter a new description for the division and press button: Ok
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Floors and Divisions
3. In the Record window of floors and divisions:
3.1. In floors, select the one you want to delete and press button:
Note:
When you delete a floor eliminates all divisions that are associated with it.
3.2. In Divisions select the division (associated with a floor) you want to delete and press button:
Note:
- When deleting a floor or a room, removes all devices / functions associated with the floor and / or division.
1. At the Mordomus Star Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Floors and Divisions
3. In the Record window of floors and divisions:
3.1. In floors, select the floor you want to add or change an image;
3.2. In Picture in E-Map, press button: To add an image to use in E-Map;
3.2.1. In the Selection window, select the image you want and press button: Ok
3.3. In Picture in E-Map press button: to eliminate the previously associated image and insert a new one to use in E-Map;
Note:
- When add/change the E-Map image on a floor, the divisions to which they are suffering the same changes in terms of image use for the E-Map.
- Deleting an image of E-Map, the image is saved in the selection window (not deleted from the disk).
1. At the Mordomus Start Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Floors and Divisions
3. In the Record window of floors and divisions:
3.1. In Floors, select the floor where the image you want to delete exists;
3.2. In E-MAP image press button:
Note:
- By eliminating the E-MAP image on a floor, the divisions to which it is no longer have any associated image.
- Deleting an image of E-MAP, the image is saved in the selection window (not deleted from the disk).
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Floors and Divisions
3. In the Record window of floors and divisions:
3.1. In floors, select the floor where the image you want to find;
3.2. In E-MAP image press button:
Note: Turning the E-MAPimage on a floor, the divisions to which it is associated suffer the same changes.
Modules / Addresses
Modules registration specifying their device to control. This feature is managed by the Mordomus Installer Agent. This procedure is the basis for the proper functioning of Mordomus system. Each input or output of each module has a unique address according to the configuration of the jumpers of each module, each address is used in the system configuration.
- This feature is required to be managed by its Mordomus Installer Agent.
Users
Management of user accounts. The management is made by the configurator or by the Administrator, allowing it to set codes and security permissions.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Users
3. In the Users window:
3.1. In Users select as your user type: Configurator or Administrator;
4. In Mordomus Console Access:
4.1. In User Name, press button: and change the name if you want;
4.1.1. on the alphanumeric keypad, press button: Ok
4.2. In Bound Code, press button: and change the access code (access to home Mordomus);
4.2.1. On the numeric keypad, press button:
4.3. Outbound Code, press button: and change the exit code (Mordomus login validation mode);
4.3.1. On the numeric keypad, press button:
Note: In the first interaction with the Mordomus iThink, local access data (username, entry code and exit code) are preset and must consult them on this help: LogOff.
5. Remote Access:
5.1. Select the active activation box, so that the web access becomes available;
5.2. In Username, press button: and enter a username for access via the web;
5.2.1. On the alphanumeric keypad, press button: Ok
5.3. In Password, press button: and enter a web access password;
5.3.1. On the alphanumeric keypad, press button: Ok
Note: In the first interaction with the Mordomus iThink, enabling remote access and your access data (username and password) must be configured.
6. User Permissions:
6.1. The Administrator and Configurator have unlimited access to all features Mordomus.
6.2. If you want to disable any account permission must uncheck the corresponding box to the activation permission.
7. To save your changes, press button: Apply
Note:
- The user Administrator and Configurator is not allowed to be removed;
- The remaining users are created and managed by the Administrator and Configurator.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Users
3. In the Users window:
3.1. In Users press button:
3.1.1 On the alphanumeric keypad, enter the name for the user and press button: Ok
3.2. In access Mordomus console -> Input Code:
3.2.1. In Entrance Code, press button: and enter the access code (access to home Mordomus);
3.2.1.1. On the numeric keypad, press button:
3.3. In Logout Code, press button: and enter the exit code (Mordomus login validation mode);
3.3.1. On the numeric keypad, press button:
3.4. Remote Access:
3.4.1. Select the active activation box, so that the web access becomes available to the user;
3.4.2. In Username, press button: and enter a username for access via the web;
3.4.2.1. On the alphanumeric keypad, press button: Ok
3.4.3. In Password, press button: and enter a web access password;
3.4.3.1. On the alphanumeric keypad, press button: Ok
4. User Permissions:
4.1. To limit the user to access, you must deselect the corresponding activation box to the permission that you want.
5. To save the user, press button: Apply
Note:
- You may not manage users, you can only manage their data Local Access and Remote Access;
- The user does not have access permissions to the registry floors and divisions and modules / addresses.
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Users
3. In the Users window:
3.1. Users, select the user that you want to change data and permissions;
3.2. In access Mordomus console and Remote Access, change the data you want;
3.3. Permissions the user to enable or disable the permissions that you want to limit the user;
4. To save your changes, press button: Apply
1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button Users
3. In the Users window:
3.1. Users, select the user you want to delete and press button:
Audio
Are the pre-defined settings for the alert alarms, bells input or other events available at Sound Events.

These settings allow to define:


- The locations of sound outputs that are activated; at what time of day (Time), the volume level and what used audio input.

1. In Mordomus iThink Home Menu, press button: Configurations
2. In the Configurations window -> Records, press button: Audio
3. In the Audio Configurations window:
3.1. Sound events, select the default event and you want to configure;
3.1.1. In Schedule A, select 0:00:00 to set the notification of audio events is done within 24 hours of the day unchanged;
3.1.2. In Schedule A, select 0:00:00 to 0:00:00 to set the notification of audio events is made within a time interval;
3.1.2.1. On the numeric keypad, press button:
3.2. Press button: to select the locations of the house where you want to be notified by events;
3.2.1. In the Sound Output Selection window, select the sound output and press button: Ok
TIP: When selecting sound output, use the filter zone, to easily locate the audio output you want, filtering it by floor and division.
3.2.1.1. In the Sound Output Selection window, you can set the overall volume;
3.2.1.2. In the Sound Output Selection window, audible alarm events have by default the sound channel (CH1 Mordomus).
3.2.2. In the Sound Output Selection window, press button: Ok
3.3. In the Audio Settings window, press button: Apply