1. In Mordomus iThink Home Menu, press button: Scheduled Functions
2. On the Scheduled Functions window -> Devices:
2.1. In Devices, press button:
3. In the window Automatic functions -> Output:
3.1. We set hourly intervals on/off activation box Execute At and End At (we can not forget that the functions can be configured with or without hourly intervals);
3.1.1. To create an scheduled function, with Start Time ≠ End Time, select the activation box Execute At (or press button:
) and the Finish (or press button:
22.214.171.124. On the numeric keypad, press button:
3.1.2. To create an scheduled function with Start Time and End Time not set, select activation box Execute At (or press button:
126.96.36.199. On the numeric keypad, press button:
3.1.3. To create an scheduled function with Start Time not set and End Time defined, select the activation box End At (or press button:
188.8.131.52. On the numeric keypad, press button:
Note: For the function is active, always check if the activation box Active Function is selected.
3.2. In Output, press button:
and set the device you want to activate; To each output (device) you can set you the kind of Action and its Duration, if the device allows it.
3.2.1. In Action press
(100% ON) or % (percentage level) and set the level at which you want the device (output) to be activated;
- The Flashing does not allow the setting time and the output will maintain the status it had before starting the burst. You should not trigger fluorescent lamps or other slow start systems, intermittently. You can only activate the flashing in lighting and sockets outputs types.
3.2.2. In Duration, with the buttons:
set the time during which the output (device) is active;
3.3. In the Output Selection window, press button: Ok
TIP: In the device selection (Output Select), use the filter zone, to easily locate the device (output) you want, filtering it by Type, Floor and Division.
3.4. In Days of the Week, set day(s) you want to activate the function;
3.5. To save the function, press button: Save