Set alarm alarms at various times, reproducing sound by divisions of your home. To each alarm clock associate devices/functions.
1. In Menu Home Mordomus iThink, press button: Alarm Clock
2. In the Alarm Clock window:
2.1. Press the button:
2.2. On the keyboard hours enter the alarm time and press button:
3. In the Alarm Clock window -> Alarm Clock:
3.1. In Name, press button: and give the Alarm Clock a description and press button: Ok
3.2. To activate the Alarm Clock, select on state: Active activation box
3.3. In Days of the week, select the days you want to activate the alarm clock;
3.4. In Sound file, press button:
3.4.1. In the selection window, select the audio file you want and press button: Ok
3.5. In Alarm Clock Window -> Audio Outputs:
3.5.1. In Sound outputs, press button:
3.6. In the Sound Output Selection window:
TIP: Use the filter zone, to easily locate the audio output you want, filtering them by floor and division.
3.6.1. Select the output(s) of audio where you want to wake up;
3.6.2. In Volume, set the audio volume;
Note: Audible alarm events have by default the CH1 Sound Channel Mordomus.
3.6.3. Press button Ok to save.
3.7. In the Alarm Clock window -> Outputs:
3.7.1. In Outputs to turn on the alarm clock, press button:
3.8. In the Output Selection window:
TIP: In the device(s) selection (Output Select), use the filter zone, to easily locate the device (output) you want, filtering them by type, floor and division.
3.8.1. Select the (s) output (s) you want to turn on the alarm clock. Example: Imagine you wake up with the alarm clock wants your room blinds open automatically, and then the toaster starts to warm up to your breakfast. To each output (device) you can set you the kind of action and its duration if the device allows it.
3.8.1.1. In Action press (Off 0%), (flashing) (100% ON) or % (percentage level) and set the level at which you want the device (output) is activated;
- The Flashing Warning does not allow the setting time and the output will maintain the status it had before starting the burst. You should not drive fluorescent lamps or other slow start systems, intermittently. You can only activate the flashing in lighting and sockets outputs type.
3.8.1.2. In Duration, with buttons: set the time during which the output (device) is active;
3.8.2. Press button Ok to save.
3.9. In the Alarm Clock window -> Inputs:
TIP: In the device(s) selection (Select Input), use the filter zone, to easily locate the device (input) that you want, filtering them by type, floor and division.
3.9.1. In Inputs to end the alarm clock, press button:
3.10. In the Input Selection window:
3.10.1. Select the input(s) you want to end the alarm. Example: Switch, whose function will turn off the alarm when alarm notification.
3.10.2. Press button Ok to save.
1. In Mordomus iThink Home Menu, press button: Alarm Clock
2. In the Alarm Clock window:
2.1. Select the Alarm Clock you want to change;
2.2. In Alarm Clock, Audio Outputs, Inputs and Outputs, make the changes you want, using the button: (edit) or button: (delete).
1. In Mordomus iThink Home Menu, press button: Alarm Clock
2. In the Alarm Clock window:
2.1. Select the alarm you want to disable;
2.2. In Alarm Clock -> Alarm Clock, uncheck the Active box activation.
1. In Mordomus iThink Home Menu, press button: Alarm Clock
2. In the Alarm Clock window:
2.1. Select the alarm you want to delete and press button: