Create timed automatic irrigation policies. These policies can be conditioned by the Mordomus iThink weather station and the online weather forecast, which makes its management efficient.
1. In Mordomus iThink Home Menu, press button: Irrigation
2. In the Irrigation window:
2.1. Press button:
3. On the alphanumeric keypad, enter a description for irrigation sequence and press button: Ok
4. In the Irrigation window-> Irrigation sectors:
4.1. In Sector 1, press button: to add eletric valves;
4.1.1. In the Output Selection window, select the valve you want and Duration, press button: On the numeric keypad enter the time during which the solenoid valve is active. On the numeric keypad, press button:
4.1.2. In the Output Selection window, press button: Ok
Note: The creation of irrigation sectors are unlimited.
5. Time Operation, press button: to set irrigation activation times;
5.1. In Time -> Days of the Week, select the day(s) in which you want to activate the irrigation policy;
5.2. In Time, press button: and set the time to start irrigation;
5.2.1. On the numeric keypad, press button:
6. For the irrigation sequence is active, select the Active role in the Irrigation tab -> Status.
7. To set an input (i.e switch) to pause an irrigation policy must select at Irrigation list, the one you want and in Irrigation tab in Input to pause, press button:
7.1. In the Input Selection window, select the input you want and press button: Ok
7.2. In Duration pause, press button: and set the pause time of irrigation;
7.2.1. On the numeric keypad, press button:
8. To set an input (i.e switch) to cancel an irrigation policy, should select in the Irrigation list, the one you want and Irrigation tab -> Input to cancel, press button:
8.1. In the Input Selection window, select the input you want and press button: Ok
1. In Mordomus iThink Home Menu, press button: Irrigation
2. In the Irrigation window:
2.1. Select from the Irrigation list , the irrigation you want to condition;
3. In irrigation tab:
3.1. Do not water if it rained, press button: and select the duration (in hours) that you want;
3.2. In rain sensor: press button: and select the appropriate meteorological sensor and press button: Ok
1. In Mordomus iThink Home Menu, press button: Irrigation
2. In the Irrigation window:
2.1. Select from the Irrigation list, the irrigation you want to condition;
3. In Irrigationtab:
3.1. In Do Not Water If select the condition you want: tomorrow raining/snowing and/or in about two days raining/snowing.
Note: The online weather forecast requires that your CPU Mordomus has Internet connection. If you have no internet connection this condition is ignored.