File Manager
Organize, structure and accede to your information, through of the selection of drivers.
Backups
Create or it restores copy of safety of all the configurations of the system.
1. At Mordomus Main Menu, press button: Configurations
2. At Configurations window -> Users, press button: Backups
3. At Backups window:
3.1. At Save data backup of information -> Directory of destination, press button:
3.1.1. At Selection, select the folder where it wants to save the file and press button: Ok
3.2. At Save data backup of information -> Directory of destination, press button: Apply
1. At Mordomus Main Menu, press button: Configurations
2. At Configurations window -> Utilities, press button: Backups
3. At Backups window:
3.1. At Restore backup data of information -> To load file of information, press button:
3.1.1. At Selection window, select the file of information that it wants to restore and press button: Ok
3.2. At Restore backup data of information -> To load file of information, select: Keep Historic (historical of the day of the restoration) or To Apply Historic on backup (historical saved in file of backupt);
3.3.Press button: Restore
OBS:
At you restore of a backup Mordomus should to restart.
Presence simulation
Function that allows to simulate the presence of the house when this one is vacated for dissuadir possible intrusio'ns, giving perception of which really someone exists in the house. This malingerer can operate in diurnal or night way, using different equipments for each of the situations.

The Simulation of Presence uses 4 variables:

- That equipments are used to simulate the presence;

- All the equipments used in simultaneous simulation;

- Duration, in seconds, of the simulation;

- Time, in minutes, among simulations.

1. At Mordomus, press button: Configurations
2. At Configurations window-> Configurations, press button: Presence Simulator
3. At Presence Simulator window:
3.1. At Simulator -> Status, select Enabled, to activate the simulator;
3.2.At Simulator -> It Activates, and press button:and the alarm, this when activated, this simulator will activate;
3.3. At Simulator -> N º of simultaneous equipment, press button: and define all the equipments it tries to use in the simulation;
3.3.1. At numerical keyboard, press button:
3.4. At Simulator-> Luminosity Sensor, press button: and there defines which is the sensor that was providing the level of luminosity, which it defines if the simulator operates in diurnal or night way. Example: the METEO luminosity;
3.5. At Simulator -> Daytime Value, press button:and define the level of luminosity from which, exclusive, the malingerer considers to act in diurnal way;
3.6. At Duration (seconds), press button: and define in Min and in Max, the minimal and maximum time of the duration of the simulation;
3.6.1. At numerical keyboard, press button:
OBS: The duration that the simulator will use will be a value aleatory among this minimum and maximum;
3.7. At Time among simulations (Minutes), press button: and define Min and Max, the minimal and maximum time among simulations;
3.7.1. At numerical keyboard, press button:
OBS: The time among simulations that the simulator will use will be a value aleatory among this minimum and maximum.
3.8. At Daytime Outputs, press button:
3.8.1. At Output Selection window, select or (s) output (s) (devices) that it tries to use in the simulator, this when the function in overnight;
3.9. At Overnight Outputs, press the button:
3.9.1. At Output Selection window, select or (s) exit (s) (devices) that it tries to use in the simulator, this when the function in night way;
OBS: These manners are defined by the sensor of luminosity.
TIP: At the selection of the device (Output Selection), use filter zone to an easier location of the device that you look for, filtering by Type, Floor and Room.
All output devices can defined the type of actions and your its duration.
4. At Action press (Off 0%), (Intermittent), (On 100%) or % (percentage level) and if the device allows define the level that you wish that the device (output) should be activated;
-The intermittent device notice does not allow definition of the time. Also be careful to not intermittent if using florescent lamps or other slow start devices.
-The intermittent device notice does not allow definition of the time. Also be careful to not intermittent if using florescent lamps or other slow start devices.
4.1. At Duration, press button: to define the time duration which the output (device) will be active;
4.2. At Execution, press button: define the value of the time of wait before the execution and select Imediato for an execution imediata.
5. Press button: To start Simulation, to activate the simulator, in agreement with the definitions and the daytime / overnight, this one can be finished in the button: For simulation, which will be available when it start the simulation.
1. At Mordomus Main Menu, press button: Configurations
2. At Configurations window -> Configurations,press button: Presence Simulator
3. At Presence Simulator window:
3.1. At simulator, edit what you wish;
3.2. At Daytime Outputs and night, proceed to the modifications that you wish, through of button: to edit or of button: to delete.