1. At Mordomus Main Menu, press button: Schedule Functions
2. At Schedule Functions -> Devices:
2.1. At Devices
, press button:
3. At Schedule Functions -> Output:
3.1. We are going to define intervals of schedules activating/deactivating in the fields to execute at and to end at (let's not forget that the functions can be created with or without time intervals );
3.1.1. To create an automatic function, with Execution time defined and End time defined, select Execute at
(and press the button: ) and in End at (and press button: )
22.214.171.124. At numerical keyboard, press button:
3.1.2. To create an automatic function with with Execution time defined and End time undefine, select Execute at
(and press button: )
126.96.36.199. At numerical keyboard, press button:
3.1.3. To create an automatic function with Execution time undefined and End time defined, select End at
(and press button: )
188.8.131.52. At numerical keyboard, press button:
OBS: In order to the make sure the function activates, always check that the function Enable is selected.
3.2. At Output
, press button: and define the device that to activate;
To each device there can be defined a type of Action, Duration and Execution, depending on the permissions of the device.
3.2.1. At Action
, press (Off 0%), (Intermittent), (On 100%) or % (percentage level) and define a level to that device (output);
- The intermittent action does not allow the definition of time and the status will be kept the same as was before initiating the intermittent cycle. It must not be activated on florescent lamps or other systems with slow take-off. It is possible to set this action in lighting and plugs.
3.2.2. At Duration
, using buttons:define the time duration which the output (device) will be active;
3.3. At Output Selection window, press button: Ok
TIP: At the selection of the device (Output Selection), use Filter zone to an easier location of the device that you look for, filtering by Type, Floor and Room.
3.4. At Weekdays, to define or it (s) day (s) in that it tries to activate the function;
3.5. To record the function, press button: Save.