Define an alarm clock in various schedules, reproducing different sounds for the various rooms of your house. Associate devices / functions with the alarm clocks .
1. At Mordomus Main Menu, press button: Alarm clocks
2. At Alarm clocks window:
2.1. Press button:
2.2. At numerical keyboard insert the wake time and press button:
3. At Alarm clocks window-> Alarm clocks:
3.1. At Name, press the button: and of type a description to the alarm and press button: Ok
3.2.To active the alarm clock, select in status: Enable
3.3. At Weekdays, select the days of the week to activate the alarm clock.
3.4. At Audio file press button:
3.4.1. At Selection window, choose the audio file that you wish and press button: Ok
3.5. At Alarm Clock -> Audio outputs:
3.5.1. At Audio output, press button:
3.6. At Audio Output Selection window:
TIP: At selection of device(s) (Output Selection), use the filter zone to easier locate the devices that you look for, filtering by Type, Floor and Room.
3.6.1. Select the audio outputs to be used to wake up;
3.6.2. At Volume, configure the desired audio volume;
OBS: The audio events from alarm clocks, have predefined the channel CH1.
3.6.3. Press button: Ok, to save.
3.7. At Alarm clocks window -> Outputs:
3.7.1. At Alarm clock enable outputs, press button:
3.8. At Output Selection window:
TIP: At selection of device(s) (Output Selection), use the filter zone to easier locate the devices that you look for, filtering by Type, Floor and Room.
3.8.1. The outputs activated when an alarm clock starts. Example: Imagine to wake up with the blinds of your room opening automatically, or the toaster begins to warm up your breakfast.
To each device there can be defined a type of Action, Duration and Execution, depending on the permissions of the device.
3.8.1.1. At Action (Off 0%), (Intermittent), (Off100%) or % (percentage level) and define a level to that device (output);
- The intermittent action does not allow the definition of time and the status will be kept the same as was before initiating the intermittent cycle. It must not be activated on florescent lamps or other systems with slow take-off. It is possible to set this action in lighting and plugs.
3.8.1.2. At Duration, using buttons:define the time which the output (device) will be active;
3.8.2. Press button: Ok, to save.
3.9. At Alarm clocks window -> Inputs;
TIP: To each device there can be defined a type of Action, Duration and Execution, depending on the permissions of the device.
3.9.1. At Alarm clock ending inputs, press button: :
3.10. At Input Selection window:
3.10.1. Select the input that you want to use to finish the alarm clocks. Example: an wall switch which will the terminate the alarm clock.
3.10.2. Press button: Ok, to save.
1. At Mordomus Main Menu, press button: Alarm clocks
2. At Alarm clocks window:
2.1. Select the alarm clock that you want to edit;
2.2. At Alarm clock, Audio output, Outputs and Inputs, proceed to edit what you wish, using the button: (edit) and button: to remove audio outputs.
1. At Mordomus Main Menu, press button: Alarm Clocks
2. At Alarm Clocks window:
2.1. Select the alarm clock to disable
2.2. At Alarm Clock -> Alarm Clock, uncheck the activation box Status
1. At Mordomus Main Menu, press button: Alarm clocks
2. At Alarm clocks window:
2.1. Select the alarm clock to delete and press button: Delete