Create polices of automatic irrigation schedules. These policies can be managed by Mordomus meteorological station and on line forecast, which does the most efficient management.
1. At Mordomus Main Menu, press button: Irrigation
2. At Irrigation window:
2.1. Press button:
3. At alphanumeric keyboard, type a description for the irrigation sequence and press button: Ok
4. At Irrigation window -> Irrigation Sector:
4.1. At Sector 1, press button: to add electricvalves;
4.1.1. At Output Selection window, select the electricvalve that you wish and their enable Duration, press button: At alphanumeric keyboard type the time length for the electricvalve to be active. At numerical keyboard, press button:
4.1.2. At Output Selection window, press button: Ok
OBS: The creation of irrigation sectors are unlimited.
5. At Schedule, press button: to define schedules of irrigation activation;
5.1. At Schedule -> select Week days to active the irrigation sequence;
5.2. At Hour, press button: and define the time to start irrigation sequence;
5.2.1. At numerical keyboard, press button:
6. In order to activate an irrigation sequence, in tab Irrigation -> Status, select the Enable function.
7. To define a control input (ex. wall switch) that pauses an irrigation sequence, select, at the Irrigation list, the irrigation sequence that you wish, and in tab Irrigation, Input Pause press button:
7.1. At Input Selection, select the Input that you wish and press button: Ok
7.2. At Pause Duration, press button: and define the pause time for the irrigation;
7.2.1. At numerical keyboard, press button:
8. Define an input (eg. wall switch) to cancels an irrigation sequence, select, at the irrigation list, the irrigation sequence that you wish, and in tab Irrigation, Cancel input, press button:
8.1. At Input Selection window, select the input that you want to use and press button: Ok
1. At Mordomus Main Menu, press button: Irrigation
2. At Irrigation window:
2.1. Select from the list of irrigation sequences the one to define;
3. At Irrigation tab:
3.1. At Do not irrigate if rained press button:and select the period of time since there has not been rain (in hours);
3.2. At Rain sensor, press button: and select a meteorological sensor to use and press button: Ok
1. At Mordomus Main Menu, press button: Irrigation
2. At Irrigation window:
2.1. Select from the list of irrigation sequences the one to define;
3. At Irrigation tab:
3.1. At Do not irrigate if select the correspondent that suits your needs: Rains/Snows tomorrow or Rains /Snows in next two days
OBS: To use the online weather forecast it is mandatory that your Mordomus CPU has an internet connection. In case it is not connected to internet, this function will be ignored.